Cat Window Mesh Size & Cut Planner | PawFrame
Every window is different.
Make every cut count.
Start with a tape measure. Turn six readings
into one clear, considered cutting plan.
Your window workbench
Measure from a consistent reference. Finish with the product’s cutting rule.
01Window dimensions
Example dataDepth & diagonal checks
Product rules & cut allowances
Enter raw-mesh allowances for each edge. These are not finished-frame dimensions.
Follow the product specification. No universal allowance is assumed.
02Your frame drawing
LIVEFocus a measurement to highlight its line on the drawing.
Less waste. A clearer layout.
Arrange mesh for several windows and see how much material to buy.
PawFrame Studio · cutting worksheet
Material settings
Length unit: mm
Estimated material cost
Compare two shelf-packing plans. A practical layout, with no guarantee of the mathematical optimum.
Your cutting layout
MESH ROLL TETRISand a confirmed product rule.
Unused area includes gaps and edge trim; reusable scraps need a separate dimensional check.
| Window / method | Six readings (mm) | Mesh cut (mm) | Review |
|---|
Unconfirmed windows are excluded from the cut layout. Order follows the layout labels. All exported dimensions are mm. Material specification, fixings and installation must be checked separately.
From your desk to the workshop.
Print your measurements and cutting plan, or take the files with you.
This tool helps with dimensions and cut planning. It does not certify mesh strength, fixings, fall protection or installation suitability. Preparation checklist: tape measure, compatible frame and fixings, mesh with known specifications, cutting tool and manufacturer instructions. Spline, screws and other quantities depend on the selected product.
A better plan starts
with better measurements.
Three useful principles for your first measurement
Find your reference
Measure at the fixing groove or product-specified reference. Do not mix the visible glass opening with the outer frame dimension. Sliding, casement and tilt windows can need different protective systems.
Take six readings
Measure width at top, middle and bottom; height at left, centre and right. Keep the tape straight and repeat unexpected readings. Optional diagonals help flag a shape that needs further checking.
Apply the product rule
The planner uses the smallest width and height, then adds your separate left, right, top and bottom mesh allowances. This is raw mesh sizing, not a finished-frame deduction rule. Check depth, hardware and fixing details separately.
One more check before you cut.
Preparation checklist: tape measure, compatible frame and fixings, mesh with known specifications, cutting tool and manufacturer instructions. Spline, screws and other quantities depend on the selected product.
Why measure at three points?
A frame can vary across its opening. Three readings reveal differences that a single width and height can miss. The smallest value is a planning reference, not a universal manufacturing specification.
Are the default allowances recommendations?
No. Start with the product instructions. The example uses 20 mm on each side only to demonstrate arithmetic. Different fixing methods and materials need different rules.
Does the plan guarantee cat safety?
No. Correct dimensions do not demonstrate mesh strength, secure fixings or fall protection. Tilt windows can also trap cats. Use a suitable protective system and obtain installation guidance where necessary.
How is material use calculated?
Two shelf layouts, sorted by largest side or area, are compared. Rotation, roll width, edge trim and cutting gap are respected. Purchase length rounds upward to 0.1 metre. Unused area is not automatically usable scrap.
Can I reopen my project?
Projects are automatically stored in this browser when storage is available. Export JSON for backup or transfer. Changing browsers or clearing website data can remove the local copy.
How do I get a PDF?
Use Print / Save PDF and choose Save as PDF in the browser print dialog. The sheet includes measurements, raw mesh sizes, the roll plan and unresolved checks.
A good fit is only one part of a safe installation.
This tool helps with dimensions and cut planning. It does not certify mesh strength, fixings, fall protection or installation suitability.
Ordinary insect screens can come loose under a cat’s pressure. Check a suitable protective system and manufacturer instructions. Tilt windows also need separate trapping-risk checks.
Comments
Post a Comment